Thermo Electric Technologies
Bengaluru, Karnataka
GST No. 33ADVPV8070H1ZU
08048979625 89% Response Rate
Send E-mail
- Home
- »
- Our Product Range
- »
- Induction Melting Furnace
| Minimum Order Quantity | 1 Piece |
| Max Temperature | 1200 deg C |
| Weight | 56 Kg |
| Model No | YL-8M |
| Max Input Power | 8 kW |
| Max Input Current | 32A (40A 1phase circuit breaker required) |
| Heating Current | 200-600A |
| Voltage | 220V+-20% |
| Frequency | 50-60 Hz |
| Phase | Single Phase |
| Water Temperature | Less Than 40 deg C |
| Size | 460 x 520 x 560 mm |
| Melting Capacity | 1-3 Kg |
| Model | YL-8M | YL-16M |
|---|---|---|
| Max input power | 8KW | 16KW |
| Max input current | 32A (40A 1phase circuit breaker required) | 3-23A (25A 3 phase circuit breaker required) |
| Heating current | 200-600A | 200-1000A |
| Frequency | 30-80KHz | |
| Voltage | 1phase 220V±20%, 50/60Hz | 3phase 380V±20%, 50/60Hz |
| Duty cycle | 80% | |
| Cooling water request | ≥ 0.2 Mpa ≥6L/min | |
| Water temperature | <40°C | |
| weight | 56KG | 65KG |
| Size | 460 x 520 x 560mm | 490 x 490 x 880mm |
| Melting capacity | 1-3kg | 1-8kg |
| Max temperature | 1200°C | |
| Cross Section mm2/per wire(copper core) | 6mm2 | 10mm2 |
| Minimum Order Quantity | 1 Piece |
| Melting Material | Aluminium |
| Material Loading Capacity (T) | 10-1000 Kg |
| Power Source | Electric |
| Rated Power (KW) | 20-1000 kW |
| Input Voltage (V) | 415 |
| Melting Time | 1 Hr |
| Max OperatingTemperature | 1600 deg C |
| Max Input Current | 23A |
| Output Current | 3-22A |
| Output Voltage | 70-550A |
| Frequency | 50-60 Hz |
| Generator net Weight | 26 Kg |
| Generator Size | 47 x 27 x 45 cm (L x W x H) |
| Heating Time | 1-99 seconds |
| Model | MF-15 | MF-25 | MF-35 | MF-45 | MF-70 | MF-90 | MF-110 | MF-160 | MF-240 | MF-300 |
|---|---|---|---|---|---|---|---|---|---|---|
| Max Input power | 15KW | 25KW | 35KW | 45KW | 70KW | 90KW | 110KW | 160KW | 240KW | 300KW |
| Max Input current | 23A | 36A | 51A | 68A | 105A | 135A | 170A | 240A | 360A | 460A |
| Output current | 3-22A | 5-45A | 10-70A | 15-95A | 20-130A | 25-170A | 30-200A | 30-320A | 40-430A | 50-550A |
| Output voltage | 70-550A | |||||||||
| Input voltage | 3phase 380V 50 or 60HZ or according customer’s requirement. | |||||||||
| Frequency | 1KHZ – 20KHZ according customer’s workpiece require. | |||||||||
| Duty cycle | 100% 24hours continuous working | |||||||||
| Generator net weight | 26 | 28 | 35 | 47 | 75 | 82 | 95 | 125 | 240 | 290 |
| Generator size LxWx H cm | 47x27x45 | 52x27x45 | 65x35x55 | 75x40x87 | 82x50x87 | 80x56x180 | 80x56x180 | |||
| Timer | Heating time: 1-99 seconds retaining time: 1-99 seconds | |||||||||
| Front panel | LCD, display frequency, power, time etc. | |||||||||
| Whole systems water flow | ≥0.2Mpa ≥6L/Min | ≥0.3Mpa ≥10L/Min | ≥0.3Mpa ≥20L/Min | ≥0.3Mpa ≥30L/Min | ||||||
| Power supply water flow | ≥0.2Mpa ≥3L/Min | ≥0.2Mpa ≥4L/Min | ≥0.2Mpa ≥6L/Min | ≥0.2Mpa ≥15L/Min | ||||||
| Water way | 1 water inlet, 1 water outlet | 1 water inlet, 3 water outlet | ||||||||
| Max water temp. | ≤40??? | |||||||||
| AuxiliaryFunction | 1.model MF-XXA has timer function, heating time and retaining time can be preset and controlled independently from 0.1-99.9second. 2.model MF-XXB is used together with transformer. |
|||||||||
| Heater Material | Mild Steel |
| Voltage | AC-220V/440 V |
| Model No | HS-IH 1003 |
| Frequency | 50 Hz |
| Power Rating | 3 kW,5 kW,100 kW |
| Output Frequency | 5-20 kHz |
| Melting Capacity | 1 Ton |
| Cooling Water | Flow of 6 Liters per Minute with Less Than 400 deg C |
4.5/5
Reviewed by 39 Users
Most Relevant Reviews